Batteries / SR

SR1130

Silver oxide / zinc

Cross-checked Primary battery

Reviewed:

1.55 VNominal voltage
Ø 11.6 × 3.05 mmReference dimensions
Reference dimensions · SR1130
SR1130Ø 11.6 mm3.05 mm

Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.

The type status describes documentary checks of core specifications, not every fact or suitability for a device.

Understanding SR1130 before replacement

Identify the actual battery

SR1130 is a documented Silver oxide / zinc primary cell with a nominal voltage of 1.55 V. Its reference diameter is 11.6 mm and its reference height is 3.05 mm. These are nominal reference dimensions, not a promise that every manufacturer has identical tolerances.

This dataset describes a non-rechargeable bare cell, without solder tabs or wires. A tabbed or wired assembly requires a separate fit check.

What markings identify this type?

The dataset associates SR1130SW, SR1130W with SR1130. The manufacturer may use a different label on the package. These references help identify the type; they do not certify the battery for a particular device.

A suffix such as W or SW describes a discharge/load variant. Preserve this requirement when choosing a replacement.

Similar dimensions in this catalogue

The following types share the same reference diameter as SR1130. Their height, chemistry or voltage may differ. They are comparisons, not approved substitutes:

  • LR54 — LR54: 3.05 mm high, 1.5 V; Alkaline zinc / manganese dioxide.
  • SR1136 — SR1136: 3.6 mm high, 1.55 V; Silver oxide / zinc.
  • LR1120 — LR1120: 2.05 mm high, 1.5 V; Alkaline zinc / manganese dioxide.

What to check before replacing SR1130

Read the original device marking, verify nominal voltage and chemistry, compare diameter and height, and check the contacts and load requirements. Same diameter, identical voltage, or a familiar brand prefix alone is not enough to establish interchangeability.

The available data contains no affirmative device-specific fit test for SR1130. A missing compatibility relation means “not assessed,” not “compatible.”

How reliable are these specifications?

Core type characteristics were compared with primary material from at least two independent publishers. This does not verify all model-specific values or physical suitability.

Technical specifications

DesignationSR1130
Cross-checked using documents from two independent publishers [Maxell] [Sony] [Seiko Instruments]
ChemistrySilver oxide / zinc
Cross-checked using documents from two independent publishers [Maxell] [Sony] [Seiko Instruments]
Nominal voltage1.55 V (Nominal)
Cross-checked using documents from two independent publishers [Maxell] [Sony] [Seiko Instruments]
Diameter11.6 mm
Cross-checked using documents from two independent publishers [Maxell] [Sony] [Seiko Instruments]
Height3.05 mm
Cross-checked using documents from two independent publishers [Maxell] [Seiko Instruments]
RechargeableNo
Documented source [Maxell]
Terminal formBare cell without tabs or leads
Documented source [Maxell]

Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.

Other designations

These codes identify the same type family. Match the load variant, terminals and device requirements separately.

W and SW are different load variants. The combined 357/303 product does not make every 357 and 303 product interchangeable.

Documented brands

Maxell

Brand presence comes from product documents or documented code mappings; current availability is not checked.

Product-specific observations

Capacity belongs to an individual product and test regime. It is not a universal value for this battery type.

Maxell SR1130SWDocumented source

Current availability not checked · SW / low drain [Maxell]

Capacity83 mAh (Nominal)
Documented source [Maxell]
Test current0.1 mA
Documented source [Maxell]
Cutoff voltage1.2 V
Documented source [Maxell]
Test temperature20 °C
Documented source [Maxell]
Test scheduleContinuous discharge
Documented source [Maxell]

Replacement limits

Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.

Replacement evidence by category

Other markings of this technical type

SR1130SW SW / low drain · SR1130W W / high drain

These markings resolve to this type in documented sources. The exact variant and device requirements still matter.

Conditional replacement: review requirements

No conditional cross-type relation is recorded.

Known obstacles to direct replacement

No explicit obstacle is recorded here; that is not evidence of compatibility.

Other type pairs without a recorded assessment

This pair has not been assessed. No compatibility conclusion is available.

No automatic replacement recommendation. Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.

Compare batteries

Sources & verification

  • Maxell · maxell-sr-web Documented source

    Maxell SR/LR technical specifications
    · Reviewed:

    Current availability not checked
  • Sony · v011-sony-sr Historical document

    Sony Silver Oxide Button Battery Cross Reference
    · Reviewed:

    Current availability not checked
  • Seiko Instruments · v012-sii-sr Documented source

    Seiko Instruments published technical type specifications
    · Reviewed:

    Current availability not checked

Common questions

What size is SR1130?

Ø 11.6 × 3.05 mm

Can SR1130 be recharged?

No. Do not charge primary cells.

Can SR1130 replace another battery?

Not on the basis of size or matching names alone. Check the exact device requirements and the directed compatibility notes. This catalogue does not contain a guaranteed device-fit recommendation for SR1130.

How does SR1130 differ from LR54?

SR1130 and LR54 have reference heights of 3.05 mm and 3.05 mm respectively, and nominal voltages of 1.55 V and 1.5 V. Their chemical systems are Silver oxide / zinc and Alkaline zinc / manganese dioxide. These comparisons do not establish a permitted replacement.

Open technical comparison: LR54

This is a technical comparison, not an equivalence or fit certificate.