Batteries / LR
Alkaline zinc / manganese dioxide
Cross-checked Primary batteryReviewed:
Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.
The type status describes documentary checks of core specifications, not every fact or suitability for a device.
LR44 is a documented Alkaline zinc / manganese dioxide primary cell with a nominal voltage of 1.5 V. Its reference diameter is 11.6 mm and its reference height is 5.4 mm. These are nominal reference dimensions, not a promise that every manufacturer has identical tolerances.
This dataset describes a non-rechargeable bare cell, without solder tabs or wires. A tabbed or wired assembly requires a separate fit check.
The dataset associates 1166A, A76, AG13 with LR44. The manufacturer may use a different label on the package. These references help identify the type; they do not certify the battery for a particular device.
The following types share the same reference diameter as LR44. Their height, chemistry or voltage may differ. They are comparisons, not approved substitutes:
LR44 and SR44 share 11.6 × 5.4 mm reference dimensions, but LR44 is an alkaline 1.5 V type and SR44 is a silver-oxide 1.55 V type. The dataset records conditions for substitution in each direction rather than a universal equivalence.
Read the original device marking, verify nominal voltage and chemistry, compare diameter and height, and check the contacts and load requirements. Same diameter, identical voltage, or a familiar brand prefix alone is not enough to establish interchangeability.
The available data contains no affirmative device-specific fit test for LR44. A missing compatibility relation means “not assessed,” not “compatible.”
Core type characteristics were compared with primary material from at least two independent publishers. This does not verify all model-specific values or physical suitability.
| Designation | LR44 |
|---|---|
| Chemistry | Alkaline zinc / manganese dioxide Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Nominal voltage | 1.5 V (Nominal) Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Diameter | 11.6 mm Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Height | 5.4 mm Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Rechargeable | No Documented source [Energizer] |
| Terminal form | Bare cell without tabs or leads Curator assessment [Energizer] |
Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.
These codes identify the same type family. Match the load variant, terminals and device requirements separately.
1166A [Energizer]A76 Energizer [Energizer]AG13 [Maxell]Brand presence comes from product documents or documented code mappings; current availability is not checked.
Capacity belongs to an individual product and test regime. It is not a universal value for this battery type.
A76Documented sourceCurrent availability not checked [Energizer]
| Capacity | 150 mAh (Typical) Documented source [Energizer] |
|---|---|
| Test resistance | 7,500 Ω Documented source [Energizer] |
| Cutoff voltage | 0.9 V Documented source [Energizer] |
| Test temperature | 21 °C Documented source [Energizer] |
| Test schedule | Continuous discharge Documented source [Energizer] |
| Weight | 2.4 g (Typical) Documented source [Energizer] |
| Minimum product diameter | 11.25 mm Documented source [Energizer] |
| Maximum product diameter | 11.6 mm Documented source [Energizer] |
| Minimum product height | 4.9 mm Documented source [Energizer] |
| Maximum product height | 5.4 mm Documented source [Energizer] |
Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.
1166A · A76 · AG13
These markings resolve to this type in documented sources. The exact variant and device requirements still matter.
Conditional only: chemistry and voltage differ. Check the device instructions and every condition below.
SR44 has 1.55 V instead of 1.5 V. The device must accept the chemistry, voltage and load profile.
Reference dimensions differ. A particular holder has not been evaluated; no direct replacement is established.
Voltage and dimensions differ. These types are not recorded as direct replacements.
This pair has not been assessed. No compatibility conclusion is available.
No automatic replacement recommendation. Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.
Energizer LR44 product datasheet
EBC - 4407F Page 1 of 1 · Reviewed:
Silver Oxide Batteries (SR) / Alkaline Button Batteries (LR)
· Reviewed:
Micro Battery Cross Reference and Replacement Guide
October 2017 · Reviewed:
Battery Comparison Chart: primary and rechargeable batteries
· Reviewed:
Energizer LR54 product datasheet
EBC - 4402H Page 1 of 1 · Reviewed:
PZ18200: LR and SR battery differences
· Reviewed:
Energizer SR44 product datasheet
EBC - 4349C-ZB Page 1 of 1 · Reviewed:
Energizer CR1220 product datasheet
1220GL0618 · Reviewed:
Ø 11.6 × 5.4 mm
No. Do not charge primary cells.
Not on the basis of size or matching names alone. Check the exact device requirements and the directed compatibility notes. This catalogue does not contain a guaranteed device-fit recommendation for LR44.
LR44 and PR44 have reference heights of 5.4 mm and 5.4 mm respectively, and nominal voltages of 1.5 V and 1.4 V. Their chemical systems are Alkaline zinc / manganese dioxide and Zinc–air. These comparisons do not establish a permitted replacement.
Open technical comparison: PR44
This is a technical comparison, not an equivalence or fit certificate.