Required CR1632 → candidate CR1620 — CR1620
Reference dimensions differ. A particular holder has not been evaluated; no direct replacement is established.
- Check the holder dimensions.
Batteries / CR
Lithium / manganese dioxide
Cross-checked Primary batteryReviewed:
Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.
The type status describes documentary checks of core specifications, not every fact or suitability for a device.
CR1632 is a documented Lithium / manganese dioxide primary cell with a nominal voltage of 3 V. Its reference diameter is 16 mm and its reference height is 3.2 mm. These are nominal reference dimensions, not a promise that every manufacturer has identical tolerances.
This dataset describes a non-rechargeable bare cell, without solder tabs or wires. A tabbed or wired assembly requires a separate fit check.
The dataset associates ECR1632, DL1632 with CR1632. The manufacturer may use a different label on the package. These references help identify the type; they do not certify the battery for a particular device.
The following types share the same reference diameter as CR1632. Their height, chemistry or voltage may differ. They are comparisons, not approved substitutes:
Read the original device marking, verify nominal voltage and chemistry, compare diameter and height, and check the contacts and load requirements. Same diameter, identical voltage, or a familiar brand prefix alone is not enough to establish interchangeability.
The available data contains no affirmative device-specific fit test for CR1632. A missing compatibility relation means “not assessed,” not “compatible.”
Core type characteristics were compared with primary material from at least two independent publishers. This does not verify all model-specific values or physical suitability.
| Designation | CR1632 Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
|---|---|
| Chemistry | Lithium / manganese dioxide Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Nominal voltage | 3 V (Nominal) Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Diameter | 16 mm Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Height | 3.2 mm Cross-checked using documents from two independent publishers [Energizer] [Maxell] |
| Rechargeable | No Documented source [Energizer] |
| Terminal form | Bare cell without tabs or leads Curator assessment [Energizer] |
Reference dimensions are not universal manufacturing tolerances. Check the actual cell and holder.
These codes identify the same type family. Match the load variant, terminals and device requirements separately.
Brand presence comes from product documents or documented code mappings; current availability is not checked.
Capacity belongs to an individual product and test regime. It is not a universal value for this battery type.
CR1632Documented sourceCurrent availability not checked [Energizer]
| Capacity | 130 mAh (Typical) Documented source [Energizer] |
|---|---|
| Test resistance | 15,000 Ω Documented source [Energizer] |
| Cutoff voltage | 2 V Documented source [Energizer] |
| Test temperature | 21 °C Documented source [Energizer] |
| Test schedule | Continuous discharge Documented source [Energizer] |
| Weight | 1.8 g (Typical) Documented source [Energizer] |
| Minimum product diameter | 15.75 mm Documented source [Energizer] |
| Maximum product diameter | 16 mm Documented source [Energizer] |
| Minimum product height | 3 mm Documented source [Energizer] |
| Maximum product height | 3.2 mm Documented source [Energizer] |
| Minimum operating temperature | -30 °C Documented source [Energizer] |
| Maximum operating temperature | 60 °C Documented source [Energizer] |
CR1632Documented sourceCurrent availability not checked [Maxell]
Documented product; no individual technical observations in this dataset.
Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.
ECR1632 · DL1632
These markings resolve to this type in documented sources. The exact variant and device requirements still matter.
No conditional cross-type relation is recorded.
Reference dimensions differ. A particular holder has not been evaluated; no direct replacement is established.
Reference dimensions differ. A particular holder has not been evaluated; no direct replacement is established.
Reference dimensions differ. A particular holder has not been evaluated; no direct replacement is established.
This pair has not been assessed. No compatibility conclusion is available.
No automatic replacement recommendation. Device compatibility has not been verified. Dimensions alone do not prove that a battery fits or works.
Energizer CR1632 product datasheet
1632NA0618 Page 1 of 1 · Reviewed:
Coin Type Lithium Manganese Dioxide Batteries (CR)
· Reviewed:
Battery Comparison Chart: primary and rechargeable batteries
· Reviewed:
Micro Battery Cross Reference and Replacement Guide
October 2017 · Reviewed:
Energizer CR1620 product datasheet
1620GL0618 Page 1 of 1 · Reviewed:
Energizer CR1616 product datasheet
1616GL0618 Page 1 of 1 · Reviewed:
Energizer CR2032 product datasheet
2032NA0618 Page 1 of 1 · Reviewed:
Ø 16 × 3.2 mm
No. Do not charge primary cells.
Not on the basis of size or matching names alone. Check the exact device requirements and the directed compatibility notes. This catalogue does not contain a guaranteed device-fit recommendation for CR1632.
CR1632 and BR1632 have reference heights of 3.2 mm and 3.2 mm respectively, and nominal voltages of 3 V and 3 V. Their chemical systems are Lithium / manganese dioxide and Lithium / polycarbon monofluoride. These comparisons do not establish a permitted replacement.
Open technical comparison: BR1632
This is a technical comparison, not an equivalence or fit certificate.